If it is known that devices other than a proximity card are on various ports, you should exclude those port numbers.
"x" should be replaced by the port to be excluded from scanning, and the value of the property should then be set to 1 to exclude that port.
For example, if an auxiliary input device is installed on port 3, you would set:
pcProxExcludePort3 = 1
Ports that are associated with modems are automatically excluded from scanning.
Section: System
Default: pcProxExcludePortx =
All port numbers from pcProxPortScanLow to PcProxPortScanHigh will be scanned, excepting those associated with modems, if pcProxEnable is set to 1.
