Enables you to set your VTScada applications to operate in simulation mode, as though data is being transmitted and received from Data Flow RTUs.
If set to 0 (default), then the Data Flow simulation mode is turned off.
Your system must consist of at least one Data Flow RTU driver tag whose selected I/O device is a serial port tag in order for the simulation to work. If the simulation is working properly, data should appear to be transmitted and received on the Communications Data page.
The DemoMode variable further enables you to enhance the simulation by mocking data as if a fully-configured system with multiple I/O tags is in operation.
Section: System
Default: DFSimulateOn = 0
*Restart Required (Settings.Startup property)
